Low Pressure Duplex Filter Pi 281
Nominal pressure 10/16 bar (140/230 psi), nominal size 1250 up to 8000
|
| 1. Features |
| High performance filters for modern hydraulic systems |
|
Modular system
Compact design
Minimal pressure drop through optimal flow design
Visual/electrical/electronic maintenance indicator
Flanged connections
|
Quality filters, easy to service
Equipped with highly efficient glass fibre Sm-x filter elements
Beta rated elements according to ISO 16889 multipass test
Elements with high differential pressure stability and dirt holding capacity
Worldwide distribution
|
 |
|
| 2. Flow rate/pressure drop curve complete filter |
y = differential pressure Δp [bar]
x = flow rate V [l/min]
| 1 = Sm-x 3 |
3 = Sm-x 10 |
5 = Mic 10 |
7 = Drg 40 |
9 = Drg 100 |
| 2 = Sm-x 6 |
4 = Sm-x 25 |
6 = Drg 25 |
8 = Drg 60 |
|
|
| 3. Separation grade characteristics |
4. Filter performance data |
y=beta-value
x=particle size [µm]determined by multipass tests (ISO 16889)
calibration according to ISO 11171 (NIST) |
tested according to ISO 16889 (multipass test)
| Sm-x elements with |
| max. Δp 10 bar |
| Sm-x 3 ß5(c) ≥200 |
| Sm-x 6 ß7(c) ≥200 |
| Sm-x 10 ß10(c) ≥200 |
| Sm-x 25 ß20(c) ≥200 |
Values guaranteed up to
5 bar differential pressure |
|
| 5. Quality assurance |
MAHLE filters and filter elements are produced according to the following international standards:
 |
| 6. Symbols |
 |
| 7. Order numbers |
 |
 |
| 8. Technical specifications |
| Design: |
line mounting filter, mounting via through holes at supporting stands |
| Fitting position: |
upright |
| Butterfly valve switch over device |
|
| Temperature range: |
- 10 °C to + 100 °C (other temperature ranges on request) |
| Filter housing material: |
steel welded construction |
| Material of seals: |
NBR (other materials on request) |
| NBR (other materials on request) |
Δp 3.5 bar +/- 10 % |
| Activating pressure of optical/electrical |
Δp 2.2 bar +/-10 % |
| contamination indicator: |
|
| Electrical data of contamination indicator: |
|
| Maximum voltage: |
250 V AC/200 V DC |
| Maximum current on contact: |
1 A |
| Maximum contact load: |
70 W |
| Type of protection: |
IP 65 when inserted and secured |
| Contact: |
bistable |
| Cable sleave: |
M20x1.5 |
 |
|
The switching function can be changed by turning the electric upper part by 180° (normally closed contact or normally open contact). The state on delivery is a normally closed contact. By inductivity in the direct current circuit the use of suitable protection circuit should be considered. Further maintenance indicator details and designs are available in the maintenance indicator data sheet. We recommend you to contact us concerning applications of our filters in areas governed by the EU Directive 94/9 EC (ATEX 95). The standard version can be used for liquids based on mineral oil (corresponding to the fluids in Group 2 of Directive 97/23 EC Article 9). If you consider to use other fluids please contact us for additional support. * Subject to technical alteration without prior notice. |
|
| 9. Dimensions |
 |
 |