|
Behringer BMF Micro-Filtration Systems |
| Oil contaminiation attributes to 70% of all failure of Hydraulic Components. Silt particles, the smallest particles under 3 micron cause most of this damage, by removing these contaminates your component life can be extended. In a normal hydraulic system alternating dynamic flow speed inhibits the achievement to a fine filtration level. Behringer's BMF unit is an offline portable or stationary self contained filtration unit, allowing for fine filtration (1 micron absolute) at a very low flow rate. This is done in a steady state flow situation which optimizes particle retention. It is ideal for hydraulic systems with inadequate filtering capacity. The compact design allows for mounting directly near a hydraulic reservoir. This unit is available for fluid of water glycol, water base fluids and phosphate esters. In addition, media is available for water removal in hydraulic fluids. | |
 |
|
 |
| Specifications |
| Motor/Choice: |
Single Phase
115V/230V
wired at time of install
6.2/3.1 amps |
3- Phase
230V/460V
wired at time of install
1.6/.8 amps |
| Manifold/Choice |
Single or dual |
| Aluminum - Zinc |
Aluminum |
| Max. Oil Temp. |
250° F |
| Viscosity Range |
0-1600 SUS |
| Visual Indicator |
Pressure Gauge 0 - 200 PSI |
| Pump |
Gear |
| Flow Rate |
2.4 GPM |
Test Point
Threads |
7/16 - 20 UNF, SAE-4 |
| Bypass |
90 PSI |
Inlet/Outlet
Connection |
1/2 JIC 37° Flare Connection |
| Weight |
BMF1-45lbs, BMF2-60lbs |
Fluid Type
Compatibility |
All Types |
| Replacement Element Order Code |
| BMFEU-01A |
| Standard |
| BHMFEU-01A |
| Water Removal |
| |
